   |
Rocket List for Keisling
| Title | Rating | # | Altitude | Length | Diameter | Weight | Motor Diameter | Description | ||
| 100.0 1 users | 2 | 4714ft 1436.83m | 90.50" 229.87cm | 3.00" 7.62cm | 10.50lb. 4.76kg | 54mm-20 inches
| Built this one for my Level 2. Black fiberglass is currently unpainted but that may change in the future.I beveled the fins using a jig made from a cheap tile saw and added a switchband to the AV bay. Nosecone was modified with a 38mm phenolic tube so I c | ||
|  | 6 | 7908ft 2410.36m | 70.59" 179.30cm | 4.00" 10.16cm | 13.70lb. 6.21kg | 54mm | Madcow 4" AGM-58 The gray fiberglass tubing with contrasting black fins and nosecone look pretty good without paint. Finished with just decals and a little satin clear to seal everything. I ordered a longer motor tube to accommodate an Aero Pack tail cone | ||
| 5 | 3642ft 1110.08m | 42.00" 106.68cm | 2.10" 5.33cm | 1.50lb. 0.68kg | 29mm | My first high powered kit. Swapped the nosecone with a PML Intelli-cone to hold a Eggfinder and Jolly Logic Altimeter 3. Decals are from stickershock23 and are covered with clear satin Rustoleum. | |||
| | 5 | 8570ft 2612.14m | 51.00" 129.54cm | 3.00" 7.62cm | 6.03lb. 2.74kg | ||||
| | 6 | 9249ft 2819.10m | 86.06" 218.59cm | 4.09" 10.39cm | 12.10lb. 5.49kg | 54mm | Bolt Missile from Mac Performance Rocketry. | ||
| | 3 | 7663ft 2335.68m | 86.06" 218.59cm | 4.09" 10.39cm | 12.10lb. 5.49kg | 75mm | 4" Bolt Missile | ||
| 0 | 28.00" 71.12cm | 2.10" 5.33cm | 1.25lb. 0.57kg | 29mm | |||||
| 1 | 2510ft 765.05m | 96.00" 243.84cm | 4.00" 10.16cm | 8.00lb. 3.63kg | 54mm-30 inches
2:38mm- | I've been wanting to build a 2 stage for a while and finally saw Madcow had these in stock. | |||
| | 7 | 10898ft 3321.71m | 70.92" 180.14cm | 4.00" 10.16cm | 11.90lb. 5.40kg | ||||
| 3 | 8100ft 2468.88m | 90.93" 230.96cm | 4.00" 10.16cm | 14.00lb. 6.35kg | 75mm-16 inches
| ||||
| | 1 | 2339ft 712.93m | 64.37" 163.50cm | 3.00" 7.62cm | 6.69lb. 3.03kg | 54mm | This rocket was built from the remains of my Bolt Missile after a motor CATO took out the booster. Everything from the AV bay on up was salvageable. The paint job is rattle can rusto and my wife printed the vinyl stars and the great seal on the nosecone w | ||
| | 3 | 9065ft 2763.01m | 101.00" 256.54cm | 5.00" 12.70cm | 24.80lb. 11.25kg | 75mm | Picked this up from Mad Cow back when they had their 4th of July sale. I added a couple of extra centering rings at the aft end of each fin set, one is a 4"-3" that was sanded to fit the ID of the tail cone. That tail cone added some complexity to the bui | ||
| 100.0 1 users | 3 | 9929ft 3026.36m | 2.09" 5.31cm | 38mm | Beautiful thin wall red fiberglass was too good to cover with paint. I added a Giant Leap Slimline Tailcone to complete the look. |
