# = Number of Launches

Rocket List for timcub  

TitleRating#AltitudeLengthDiameterWeightMotor DiameterDescription
11022633_10206578358521710_8716018739528445597_n.jpg Tomahawk
100.0
1 users
8 3797ft
1157.33m
65.50"
166.37cm
4.00"
10.16cm
5.81lb.
2.64kg
38mm
This is a PML D-region Tomahawk. The stock kit is meant to be motor ejection but I built it for DD. I ditched the piston and went with conventional deployment.
Blue-Streak-I303-Tim-Cubbedge-A.jpg 1/4 scale Patriot
85.0
1 users
6 2588ft
788.82m
55.70"
141.48cm
3.90"
9.91cm
3.13lb.
1.42kg
38mm
This is a PML 1/4 scale Patriot. The stock kit is meant to be motor ejection but I built it for DD using the PML CPR3000 & a Perfectflite SL100. I kept the piston for the drogue and added another piston for main deployment. Should have eliminated pist
IMG_5188.JPG 2 stage kit bash
Like 2 9914ft
3021.79m
135.00"
342.90cm
4.00"
10.16cm
20.63lb.
9.36kg
75mm
2:54mm
Combining a couple of Wildman kits to make a 4" to 3" 2-stage. Had a custom coupler made to transition the 4" to 3". It is basically a chopped up WM Extreme booster with a 3" sustainer. No final weights or dimensions yet. Hoping to test flight in April. P
IMG_4339.JPG 3FCN
Like 0 999.00"
2537.46cm
7.50"
19.05cm
999.00lb.
453.14kg
54mm
3 fin - can scratch build. Laser aligned fins so she'll stay out of the spin zone & tip-to-tip with 2 layers of 6 oz. glass so she can take really hard landing!
IMG_2151.JPG Arcas
99.0
1 users
6 5302ft
1616.05m
53.82"
136.70cm
2.60"
6.60cm
3.07lb.
1.39kg
38mm
This is a Madcow 2.6" thin wall FG. I converted it to DD by adding a16" payload & AV bay.
avalanche.JPG Avalanche
Like 12 12247ft
3732.89m
48.50"
123.19cm
3.10"
7.87cm
5.75lb.
2.61kg
54mm
Cheap kit from Madcow, $99 special.
bad dog.jpg Bad Dog
Like 8 6614ft
2015.95m
87.65"
222.63cm
4.00"
10.16cm
12.81lb.
5.81kg
54mm
My Bad Dog is a 4" FG kit from Rocketry Warehouse. DD, 54mm MMT
IMG_4885.JPG Black Brant II
98.0
1 users
4 5520ft
1682.50m
79.00"
200.66cm
4.00"
10.16cm
8.69lb.
3.94kg
54mm
Built it about 2 years ago. Finally getting ready to fly it some day soon. Needs ground testing & electronics. Also need some recovery gear.
BH.jpg Blackhawk
100.0
2 users
7 5929ft
1807.16m
57.25"
145.42cm
1.50"
3.81cm
1.95lb.
0.88kg
38mm
38 mm min diameter. DD Fiberglass
IMG_2153.JPG Boob Tube
Like 13 7502ft
2286.61m
69.75"
177.17cm
3.00"
7.62cm
4.68lb.
2.12kg
54mm
This was my 1st scratch/bash build. Not sure the difference! Anyhow, 3" blue tube, DD with custom prism fins made my PML and plastic NC. 12/01/2018 update: After inspecting rocket booster after it was found 6 weeks later, pretty severe damage to air frame
IMG_3303.JPG Cheetah
92.0
2 users
2 2200ft
670.56m
31.87"
80.95cm
1.90"
4.83cm
0.56lb.
254.01g
29mm
One of my first rockets - built it in 2014. Made by Aerotech.
IMG_2305.JPG Christmas Tree
Like 1 2080ft
633.98m
33.50"
85.09cm
1.64"
4.17cm
1.35lb.
0.61kg
29mm
This is a Christmas Tree rocket I won from Wildman for buying a pint of Rocketpoxy during his black Friday sale. This kit comes with everything but a motor mount & chute protector. I think it was actually manufactured by Glenmarc Industries. This kit
IMG_2150.JPG Dark Star 3
93.0
3 users
9 8837ft
2693.52m
87.37"
221.92cm
3.00"
7.62cm
7.00lb.
3.18kg
54mm
Wildman 3" FG DarkStar, DD. Split fin design. No paint, decals by Stickershock23.com
IMG_3456.JPG Drago Extreme
Like 3 14949ft
4556.46m
85.70"
217.68cm
4.00"
10.16cm
13.00lb.
5.90kg
75mm
This is a 4" Wildman Drago Extreme. Not listed in pull down menu. Finally finished this one - had it for almost a year. Ground testing soon, maybe fly in September?
f7f210bd3fbb4484Org.jpg Eagle Claw
100.0
1 users
6 7173ft
2186.33m
106.00"
269.24cm
4.00"
10.16cm
16.37lb.
7.43kg
54mm
4" FG kit with split fins. Based on Talon design. DD, redundant altimeter with motor back-up. 60" SkyAngle main
IMG_3214.JPG Eagle Claw sport
65.0
1 users
7 2000ft
609.60m
36.00"
91.44cm
2.12"
5.38cm
2.17lb.
0.98kg
29mm
Wildman Eagle Claw Sport. 2.1" FG motor eject, split fins. Rocket required nose weight. Very unstable.
007-Photo--NEFAR-2015-08-JY.JPG Formula 98
100.0
1 users
7 5958ft
1816.00m
63.80"
162.05cm
4.00"
10.16cm
9.68lb.
4.39kg
54mm-
Rocketry Warehouse 4" FG Formula 98, DD. Blueberry fiberglass
IMG_3333.JPG Frenzy XL
98.0
1 users
7 11378ft
3468.01m
70.75"
179.71cm
3.00"
7.62cm
7.12lb.
3.23kg
54mm
MadCow 3" FG Frenzy XL, DD
IMG_0573.JPG Intruder
85.0
1 users
5 3613ft
1101.24m
58.00"
147.32cm
3.00"
7.62cm
3.38lb.
1.53kg
38mm
PML 3" Intruder with motor eject piston deploy & a payload section for gps or an altimeter. 
jart.png Jart
90.0
1 users
2 2815ft
858.01m
26.25"
66.68cm
2.29"
5.82cm
1.63lb.
0.74kg
29mm
Wildman 2.3" FG Jart. I replaced the NC with FG as plastic cone was tearing where shock cord attached. Mine is all black with stickers by Stickershock23.com. Pretty tought rocket!
IMG_1433.JPG Lil Goblin
95.0
1 users
8 2060ft
627.89m
19.25"
48.90cm
2.60"
6.60cm
2.08lb.
0.94kg
38mm-
Madcow 2.6" thin walled FG Lil Goblin. Needed nose weight. Foamed the fin can. Stickers by Stickershock23.com I built it with 38mm MMT but have only flown on 29mm MMT. This thing screams!
lil joe ii.JPG Litle Joe II
70.0
1 users
5 650ft
198.12m
26.70"
67.82cm
3.30"
8.38cm
0.53lb.
240.40g
24mm
This was the first kit I built when I was a kid and now Estes has brought it back into production. I thought the original was a bit easier & that kit had all paper & wood components. The new LJII has many polystyrene components and I am not fond o
IMG_4737.JPG Little Lumpy 1.5
89.5
2 users
25 2332ft
710.79m
53.50"
135.89cm
7.68"
19.51cm
10.69lb.
4.85kg
54mm-rebuild
This is a modified 7.65" LOC Warlock renamed "Little Lumpy". I added 2 layers of 6 oz. glass to air frame, beveled the fins, and did a tip-to-tip with another 2 layers of 6 oz. glass. This was my first attempt at glassing hence the name "little lumpy". It
IMG_1459.JPG LOC-IV
95.0
1 users
8 3069ft
935.43m
47.50"
120.65cm
4.00"
10.16cm
1.81lb.
0.82kg
38mm
4" cardboard kit from LOC Precision. This was my Level 1 cert rocket.
LOC-V2-H123-Tim-Cubbedge-B.jpg LOC-V2
80.0
1 users
1 2000ft
609.60m
40.40"
102.62cm
3.90"
9.91cm
2.50lb.
1.13kg
38mm
3.9" LOC-V2, cardboard tube, birch fins. 38mm MMT Motor eject.
IMG_4865.JPG Mega Vortico
Like 6 200ft
60.96m
1.38"
3.51cm
7.50"
19.05cm
0.09lb.
40.82g
24mm
Fun little spinner. Flies on C11, D11 & E11. Gonna see if I can do an upscale.
IMG_2032.JPG Mercury Redstone
Like 0 64.62"
164.13cm
5.50"
13.97cm
11.30lb.
5.13kg
54mm
This is the rocket that put the 1st American in space! Yes it is! This is a Polecat Aerospace 5.5", 1/13 scale Mercury Redstone. Cardboard tubing with 2 layers of fiberglass. FWFG NC, birch fins & birch CR's. I upgraded the Av bay to FG, didn't like t
IMG_2865.JPG Mongol
Like 5 11303ft
3445.15m
74.12"
188.26cm
2.24"
5.69cm
3.50lb.
1.59kg
54mm
54mm MD all carbon fiber, DD. Added slim line retainer. Glass NC.
nike.jpg Nike Smoke pseudo clone
Like 3 5557ft
1693.77m
73.00"
185.42cm
4.00"
10.16cm
7.94lb.
3.60kg
54mm
Old rocket never flown. Replaced NC wiith 4:1 conical.
IMG_2352.JPG Pike
95.0
2 users
4 9438ft
2876.70m
92.00"
233.68cm
5.50"
13.97cm
24.00lb.
10.89kg
75mm
This will be my L3 rocket. Only in the very beginnings of construction. CR's attached to MMT with Proline 4500 epoxy. AV bay vent band secured with US Composite. Recovery harness custom made by Onebadhawk. Because payload volume is so small, have to go wi
11201877_10206419883989396_6453681217168509581_n.jpg Punisher
99.0
1 users
11 6772ft
2064.11m
52.25"
132.72cm
3.00"
7.62cm
5.00lb.
2.27kg
54mm
This is a Wildman kit - not custom. 3" thin walled FG. HED deploy. 54mm MMT
IMG_1465.JPG Scooter
95.0
1 users
18 4022ft
1225.91m
35.12"
89.20cm
3.00"
7.62cm
2.08lb.
0.94kg
38mm
3" Thin wall FG kit from MadCow
IMG_3300.JPG Screech
100.0
1 users
18 6467ft
1971.14m
63.80"
162.05cm
2.60"
6.60cm
3.75lb.
1.70kg
38mm
2.6" Thin wall FG DD kit by MadCow 38mm MMT
IMG_2849 (2).JPG Screech EX
Like 4 10753ft
3277.51m
92.00"
233.68cm
4.00"
10.16cm
14.00lb.
6.35kg
75mm
This is an upscale of the 2.6" Screech. It is a whole 4" diameter with a 75mm exhaust pipe!
IMG_5042.JPG Screw It
Like 2 4837ft
1474.32m
91.50"
232.41cm
7.50"
19.05cm
25.94lb.
11.77kg
75mm
Scratch build Blue Tube. Going to be a fat & heavy rocket so I can fly L & M motors & stay inside waiver - low & slow! 2 layers of 6 oz glass topped with 1 layer of 3 oz. glass. Had to add 1 layer of 3 oz. gass to coupler as it was a very
IMG_2154.JPG Sumo
Like 2 1200ft
365.76m
41.00"
104.14cm
4.00"
10.16cm
2.56lb.
1.16kg
29mm
This is an Aerotech Sumo 4" motor eject rocket capable of flying on F, G & H motors. Mine lawn darted on one of it's flights so I replaced the upper portion of airframe with some Quantum tubing. 
IMG_5211.JPG T.R.F.K.A.B.
Like 5 1623ft
494.69m
20.75"
52.71cm
5.00"
12.70cm
2.75lb.
1.25kg
38mm
This is the rocket formerly known as black but I call it Marvin! Update: so on 12/15/18, this rocket was lost in deep grass but the guy who cuts the grass found in and unfortunately he ran it over. Not a total loss. Bad news is that this was a limited run
timidator.jpg Timidator
100.0
1 users
9 9771ft
2978.20m
87.35"
221.87cm
3.00"
7.62cm
8.27lb.
3.75kg
54mm
3" FG kit, DD, 54mm MMT.
IMG_E4044.JPG Twit
4 4267ft
1300.58m
34.50"
87.63cm
3.00"
7.62cm
1.81lb.
0.82kg
38mm
This little rocket is a screamer! Should be a fun flyer!
v2.jpg V2
100.0
1 users
4 4198ft
1279.55m
38.18"
96.98cm
4.00"
10.16cm
7.56lb.
3.43kg
54mm
Wildman 4" FG V2. Converted to DD with HED deploy. 30" Recon Recovery
IMG_1470.JPG Wildman
100.0
1 users
4 7813ft
2381.40m
48.00"
121.92cm
3.00"
7.62cm
3.00lb.
1.36kg
54mm
3" Fiberglass, 54mm MMT, Head Deploy (DD)
IMG_3457.JPG Wildman 2 stage
100.0
1 users
5 4776ft
1455.72m
94.11"
239.04cm
3.00"
7.62cm
11.06lb.
5.02kg
54mm
2:54mm
Converted my 3" Wildman into a 2-stage. Not many build pics but it is about ready for flight. Just need to set-up the electronics. This thing will easily hit 20k with right motors! Flying at in September at NEFAR
IMG_1883 (2).JPG Wildman Extreme
97.5
2 users
4 12811ft
3904.79m
98.20"
249.43cm
4.00"
10.16cm
13.94lb.
6.32kg
75mm
4" Diameter fiberglass kit with 75mm MMT
31579c29649343a3Org.jpg Wildman Jr 2-stage
100.0
1 users
6 4642ft
1414.88m
95.80"
243.33cm
2.09"
5.31cm
5.66lb.
2.57kg
38mm
2:38mm
This is the Wildman Jr 2-stage. My first 2 stage. Setting up electronics was probably the hardest part. Or maybe not! PET2+ timer in booster for ISC separation & booster deployment. RRC3 in sustainer for sustainer ignition & deployment.
zodiac bb.jpg Zodiac
Like 2 2963ft
903.12m
63.50"
161.29cm
3.00"
7.62cm
4.80lb.
2.18kg
54mm
This is a 3" canvas phenolic airframe made by MAC Performance Rocketry. Zodiac, DD with G10 fins. Suppose to be strong & light. Somewhat unstable by design with only 3 small fins and so light I had to add weight to the NC. Would have preferred a FG NC