For news TAP HERE and scroll down
IMG_6330 B.jpg
Likes Like
RocketRED HEAT
Launches1
Flight StatusSuccess
LocationBunnell, FL
Event
IMG_4768.JPGNEFAR-monthly reasearch launch 2020-01-25
Altitude3681 ft
1121.97m
Expected4400 ft
1341.12m
Velocity347 MPH
558.67km/h
Velocity Exp.381 MPH
613.41km/h
Gs Expected10.3
Wind Speed10.0MPH
16.10km/h
NW 315°
Weight11.11lb.
5.04kg
StageMotor
1 J450-14-DM METAL STORM

RED HEAT - EIGHT FLIGHT

2020-01-25 16:59:00Z

Insane Rocketry

Likefileicon launch20200125_121123_830.csv

Stratologger

Likefileicon Stratologger Main I data.pf2 Likefileicon Stratologger Back Up II data.pf2

Description

Rocket is on the bench for a December flight at the SRA field. Not so sure what the altitude and velocity will be, It's a single use DARK MATTER AEROTECH motor like a 3 grain size. Can't sim it for now, will try a same motor with approx the same newtons to get some estimated data.

Update 12/12/2019 - A few weeks ago I fried my RTX by using the gmrs radios.. Jim Amos from Missile works will sent it back ASAP so I will have it at the next SRA launch. Still need to get my rocket ready for next week.

Update 12/13/2019 - Selected a similar motor with almost the same Newtons to get a close sim on altitude and velocity. N is around 1100. (J450 DM METALSTORM - N1097).

Update 12/14/2019 - Made the charges already, Drogue 1.8 - 2.2 gams / Main 1.8 - 2.2 grams. Main chute selected - 65" spill hole - Michael West chute. Also have to make a new location loop on the chock cord for the streamer, all the way down close to the booster.

Update 12/15/2019 - Loaded the drogue charge already, on top of that dog-barf, than the streamer, really packed tight, had some shock cord wrapped around it to make the package real smaller so it glides in smoother in the booster, but still tight, Than dog-barf again on top, two z-ties made in the left over shock cord. I mill make the charge like 2 grams for the aerotech motor charge. Rocket can handle lots of charge there, has been rebuild and fortified with a sleeve.

Update 12/16/2019 - RTX came in today - Thanks Jim Amos ! Checked and working.

Update 12/17/2019 - Weather looks iffy for Saturdays launch. Low cloud cover and rain in the forecast. Also Ky and Buddy Michaelson were planned to come to the Launch after the Launch of The Boeing STARLINER @ 6.53 AM that morning. Hope the weather improves and the launch is still ago. Also some high wind ..

Update 12/20/2019 - Launch postponed to next week Saturday, Tim made a wise decision, rain and high winds and low cloud cover.

Update 12/21/2019 - Made the upper Z-ties today also. Will do some more prepping work this weekend I guess...

Update 12/23/2019 - Installed the charges, Main and drogue. And taped everything off pretty well.

Update 12/24/2019 - Stratologgers tested, Batteries were a bit low, so both are replaced now. all good.

Update 12/28/2019 - NO LAUNCH for me today !!! Weather looked iffy the days before, Low cloud-cover and some winds, so I decided not to make the 3 hrs drive ! Alex did not launched either, clouds to low ! I'm waiting for some video's or pictures from this day. My launch is moved to the SRA January launch. That is January 18th, 2020.

Update 01/18/2020 - NO LAUNCH for me again today. Have ben watching the weather all week and the wind are really strong, like 15 mph at 11 am, also some low clouds, but those winds killed it !!! Looking forward to the Bunnell launch next weekend, hope some better weather.

Update 01/20/2020 - All seems good for a Bunnell launch this coming Saturday, Winds are a bit high like 10 mph now but open skies, so I will launch, Hope it gets a bit better by the weekend. Will prep some more this week and install that single use rocket motor..

Update 01/22/2020 - Installed and assembled the Aerotech J motor - single use, today, took some pictures and video. Not much to it, all straightforward! Also charging the RTX units, and Tagg.

Update 01/24/2020 - Weather looks again better, winds are 7 mph and clear skies !! charging every thing now... Video camera, Phones, RTX Tagg.... Car loaded....and Ready..

Update 01/25/2020 - LAUNCH DAY - Clear skies all the way, But muchmore winds than predicted. Like always had a problem getting the Iphone in the 3" bay... But all working great. Streamer was in booster and RTX was in upper bay for a change, Did not fit in the booster, Tagg was in the booster ! So two GPS devices! Had to see a few launches before I launches to 4 K. All landed in the field, so that was great. I did not put any angle and went straightup. The Metal Storm was a hell of a sight and sound motor, just spectacular !!! Rocket went great in flight and came straightdown, just landed between the launch control and pads like it did before. Just impressive ! Calm day just 20 flyers or so. Tim was there also. Have to fix the window a bit and see how to get the iphone better in the bay. Used shear-pinsin the nose cone, not in booster section. All was packed tight !!! But had 5 charges in there to get deployment ! The best thing about single use motors is that there is no clean-outof any casing !! I did put some grease on the liner of that single use motor for heat purposes but I guess that has never been any issue. The motor prediction was a bit off, There was no sim in Open Rocket for that motor so I took a guess with other motors and the Newton impulse, Close but a lower result. Have video and launch data from Iphone, great, Have to work on rotation, that I did before but probably not good enough ! Great day and crowd. Also this time I had a 4K videorecorder on the ground.

Update 01/25/2020 - Thanks to Tim and Thea and Jimmy for those great pictures and video !!

 

Comments

timcub
Like 2020-01-26 07:41:28Z

Great flight & even better landing!

Keisling
Like 2020-01-26 08:11:30Z

That Metal Storm motor was impressive.

frewi80
Like 2020-01-26 08:57:37Z

And the best thing is, it's a single use motor, no casing clean out or so, just dump the empty motor, no dirty hands !!! What I did is I put some grease on the outside of that single use *casing*, might be good for something, like heat protecting or so... 

Keisling on 2020-01-26 08:11:30Z wrote:

That Metal Storm motor was impressive.


Video


Like

Like

Like

Like

Like

Images

IMG_6331.JPG
Like
IMG_6332.JPG
Like
IMG_6333.JPG
Like
IMG_6334.JPG
Like
IMG_6335.JPG
Like
IMG_6336.JPG
Like
IMG_6337.JPG
Like
IMG_6338.JPG
Like
IMG_6339.JPG
Like
IMG_6340.JPG
Like
IMG_6341.JPG
Like
IMG_6342.JPG
Like
IMG_6343.JPG
Like
IMG_6344.JPG
Like
IMG_6345.JPG
Like
IMG_6346.JPG
Like
IMG_6347.JPG
Like
IMG_6348.JPG
Like
IMG_6349.JPG
Like
IMG_6350.JPG
Like
IMG_6351.JPG
Like
IMG_6352.JPG
Like
IMG_6353.JPG
Like
IMG_6354.JPG
Like
IMG_6355.JPG
Like
IMG_6356.JPG
Like
IMG_6357.JPG
Like
IMG_6358.JPG
Like
IMG_6359.JPG
Like
IMG_6360.JPG
Like
IMG_6361.JPG
Like
IMG_6362.JPG
Like
IMG_6363.JPG
Like
IMG_6364.JPG
Like
IMG_6365.JPG
Like
IMG_6366.JPG
Like
IMG_6367.JPG
Like
IMG_6368.JPG
Like
IMG_6369.JPG
Like
IMG_6370.JPG
Like
IMG_6371.JPG
Like
IMG_6372.JPG
Like
IMG_6373.JPG
Like
IMG_6374.JPG
Like
IMG_6375.JPG
Like
IMG_6376.JPG
Like
IMG_6377.JPG
Like
IMG_6378.JPG
Like
IMG_6379.JPG
Like
IMG_6380.JPG
Like